Skip to content
CostRO

How much to charge for laser engraving and cutting

Find out how much to charge for a laser-engraved or cut part: the sheet, laser time, file preparation, scrap and VAT, each on its own line. Pick the material and the laser, enter the area and the times per part, then see the price and what you earn per hour.

The part

The price per m² and how much of the sheet is lost (edges, offcuts).

The area of sheet used for one part, including the offcuts between parts.

Unit: cm²
Unit: min
Unit: min

Large batches get a discount.

Unit: pcs
Equipment

With an account you add your own laser, with its price and consumption.

Labour

Preparing the file, focusing, testing on offcuts, finishing.

min
min
Adjustments

Short deadline: the price goes up by 25%.

Work outside working hours: the price goes up by 20%.

Difficult jobs ask for more than the costs show: this is where it shows.

Your markup

How much you add on top of the cost, as a percentage of the cost. It applies only to the calculation here.

More from this calculation

I already have a price in mindEnter the price and see what you earn at it.

What the client pays, with VAT if you are a VAT payer. I show you what is left for you.

lei
  • You lose money
  • Sub the starting rate
  • Above your rate

Enter a price and see the profit, the margin and the hourly earnings straight away.

Below 40.42 lei you lose money on this order.

Price by quantityWhat one piece costs at 1, 5, 10, 25 or 50.

As the quantity grows, fixed costs (preparation, labour per order) are shared across more pieces and the discount applies from the threshold.

The price for several quantities
QuantityPer pieceTotalDiscount
157.00 lei57.00 lei—
512.20 lei61.00 lei—
10now6.50 lei65.00 lei—
203.50 lei70.00 lei5%
252.96 lei74.00 lei5%
501.80 lei90.00 lei10%
Compare variantsA different material, quantity or machine, side by side.

Save the current variant, change something (a different material, quantity or machine) and see side by side what comes out better. At most 3 variants.

My calculationsSave, reopen or duplicate a calculation (on this device).

Kept on this device, not in an account. The last 10, for all services.

You have not saved any calculation yet for laser engraving and cutting.

The starting values are rough: change them to your own.

The calculation in brief

What people usually forget

  • Preparing the file and focusing take time on every batch, even if the laser works on its own: put them under labour.
  • The sheet is not used entirely: offcuts remain between parts. That is why the material has 15% losses.
  • Large batches cost less per piece (the setup is shared), but do not give away more than the calculator's thresholds.
  • Engraving some materials (PVC, chlorinated synthetic leather) releases toxic gases: first check that the material can be laser cut.
  • As an unauthorised individual you cannot issue invoices. You can use the calculator and quotes; for invoices you need a legal form (PFA, II or SRL).

What goes into the price of a laser part

  • The sheet: the area used per part, including the offcuts between parts, times the price per square metre.
  • The laser: its price divided by its lifespan in hours, plus maintenance and electricity per hour of work.
  • Preparation: the file, focusing and the test on offcuts, which cost the same for one part as for a batch.
  • Finishing and packing.
  • Scrap, markup and VAT, if you are a VAT payer.

What is often forgotten

  • The offcuts between parts: the sheet is not used entirely.
  • The preparation time, paid once per batch, but still working time.
  • A minimum per order, so very small jobs do not leave you at a loss.

How to use the calculator

Note how much material a part uses and how long engraving and cutting take, from your laser software. The starting values are rough examples for a 10 W diode; put in your own. For large batches, the calculator applies discounts at quantity thresholds.

Frequently asked questions

How do I calculate the price of an engraving?

Add up the material, laser time, file preparation and your work, then add scrap and markup. The calculator does this and shows every cost on its own line.

Why does the sheet have losses?

The parts do not cover the whole sheet: offcuts remain between them and at the edges, and you pay for those too. The starting value for MDF is 15%.

Do I have to include the preparation time?

Yes. The file, focusing and the test take time on every batch, even if the laser works on its own. Put it in the labour stages.

Do I need an account to use the calculator?

No. The calculator is free and needs no account. A calculation made here is not saved; for that, and for quotes and invoices, you need an account.